Stainless Steel 3 Way Mixer Tap – Elegant Rounded Square Neck
- Elegant Rounded Square Neck 304 Stainless Steel three way Mixer Tap with hot, cold mixer on one side and a smaller handled pure water lever on the other.
- Eliminates any need to have a separate drinking water tap.
Out of stock
3 Way Filter Tap
- Two separated channels: hot / cold and filtered water.
- Eliminates the need to drill an additional hole in bench top.
- If you’re doing a renovation or are building a new house this faucet is a great option.
- Perfect for a modern kitchen to give you that new brushed stainless steel look and will match with your existing stainless steel appliances like SS fridge, dishwasher or microwave.
- Best quality 3 way sink mixer tap with purified water channel.
- Made completely from food grade quality commercial 304 stainless steel, healthy, leadfree, lead free.
- Inside same as outside, smooth inner wall, clean and shining without sand holes, smooth water channel, selfcleaning by water circulation.
- Warranty: 2 years.
- Ceramic Cartridge made in Europe by Kerox or Ceramtec Germany, aerators made in Switzerland by Neoperl.
- 360 degree swivel 3 way sink mixer tap.
- Can be fitted to any under sink water filter system that uses 1/4″ tubing (default size, Bunnings), or 1/2" flexible water connector (optional), click here to add 1/2" adaptor.
- Can be fitted to any water filter uses M8 thread like Brita and others (optional), click here to add M8 adaptor.
- Can be fitted to any water filter uses 3/8" BSP thread like Brita and others (optional), click here to add 3/8"x1/4" adaptor.
- Easy to install, fits in the standard cut out holes of standard kitchen sinks or benchtops. Requires 35-40 mm hole which is generally the size hole that most kitchen sinks or benchtops come with standard.
- Achieving 30% water saving while enjoying the same comfortable water experience.
- Exquisite soft brushed technology, non-plating, environmental friendly, brushed stainless steel color shows the real steel texture.
- Dimensions: Hight 370mm (from the benchtop/sink to the highest point of the faucet).
Width 240mm (from the centre of sink hole).
- Hot/Cold Leaver: The default tall hot/cold leaver needs 80mm from the centre of tap’s hole to the tip of the handle when the handle is pushed fully to the back (wall or window), shorter leavers are available, let us know the distance between the centre of tap’s hole and wall behind and we will find a suitable solution.
- Australia Watermark Certificate.
- Wells rating 4/6 stars, 7.5 LPM, licence number 1750.
- Maximum inlet water pressure: 6 bar / 600 kpa / 87 psi.
- Includes: set of stainless hot/cold hoses, all mounting hardware, spanner/tube for tightening of lock nut and instruction booklet.
- Free shipping Australia wide, Fast Delivery New Zealand.
|Dimensions||60 × 35 × 7 cm|