Modern Short Square Neck Stainless Steel 3 way Mixer Tap
- Short neck, more suitable for small and single sinks, less splash.
- Hot, Cold mixer on one side and a smaller handled pure water lever on the other.
- Long reach 3 way mixer tap.
3 Way Filter Sink Mixer Tap
- Dimensions: Hight 300mm (from the benchtop/sink to the highest point of the faucet).
Width 230mm (from the centre of sink hole).
- Stainless steel with a brushed satin finish It is made completely from food grade high quality 304 SOLID stainless steel, HEALTHY, leadfree, no brass.
- Inside same as outside, smooth stainless steel chamber, Healthy.
- It has two handles making it easy to mix cold and hot from one side (first lever) and deliver filtered water from the other side (second lever).
- Two separate aerators (one for H/C mains water and the other for filtered pure water).
- One spout (neck) which has dual chambers on the inside so there is no cross contamination between the hot/cold mains water and filtered water.
- Two separated lines: hot/cold water and pure filtered water.
- Eliminates the need to drill an additional hole in bench top.
- If you’re doing a renovation or are building a new house this faucet is a great option.
- Perfect for a modern kitchen to give that new brushed stainless steel look and will match with your existing stainless steel appliances like SS fridge, dishwasher or microwave.
- Best quality 3 way sink mixer tap with separate purified water line.
- Inside same as outside, smooth inner wall, clean and shining without sand holes, smooth water channel, selfcleaning by water circulation.
- Warranty: 2 years.
- Ceramic Cartridge made in Europe by Kerox or Ceramtec Germany, aerators and hoses made in Switzerland by Neoperl.
- 360 degree swivel three way sink mixer tap.
- Can be fitted to any under sink water filter system that uses 1/4″ tubing (default, like water filter at Bunnings), or 1/2" flexible water connector (optional), click here to add the 1/2" adaptor.
- Can be fitted to any water filter uses 3/8" BSP thread like Brita and others (optional), click here to add 3/8"x1/4" adaptor.
- Can be fitted to any water filter uses M8 thread like Brita and others (optional), click here to add M8 adaptor.
- Easy to install, fits in the standard cut out holes of standard kitchen sinks or benchtops. Requires 35-40 mm hole which is generally the size hole that most kitchen sinks or benchtops come with standard.
- Hot/Cold Leaver: The length of default tall hot/cold leaver is 40mm.
- Achieving 30% water saving while enjoying the same comfortable water experience.
- Australian Watermarked and WELS rated.
- WELS rating 4/6 stars, 7.5 LPM, licence 1750.
- Maximum inlet water pressure: 6 bar / 600 kpa / 87 psi.
- Includes: set of stainless hot/cold hoses, all mounting hardware, spanner/tube for tightening of lock nut and instruction booklet.
- Free shipping Australia wide, 3 way sink mixer tap kitchen.
- Caravan 3 way mixer tap. 3 way mixer.
|Dimensions||44 × 37 × 7 cm|