Stainless Steel 3 way Mixer Tap – Modern Tall Square Neck
Multi-functional kitchen mixer tap, therefore saving space and clutter by eliminating the need for any other holes in the sink, This 3 way filter tap allows you to enjoy unfiltered and filtered water from the same tap.
Stainless Steel 3 Way Mixer Tap
- Dimensions: Hight 380mm (from the benchtop/sink to the highest point of the faucet).
Width 260mm (from the centre of sink hole).
- Long reach and high mixer tap spout.
- Stainless steel with a brushed satin finish this 3 way filter mixer tap is sure to be a show stopper in any kitchen.
- It eliminates the need for an additional tap for filtered water alone and gets rid of the clutter around the sink which allows the kitchen to keep its original state.
- It connects to an under sink filtration system to provide hot, cold and filtered water from the main kitchen mixer, all from the same tap.
- Two separate aerators (one for H/C mains water and the other for filtered pure water).
- One spout (neck) which has dual chambers on the inside so there is no cross contamination between the hot/cold mains water and filtered water.
- If you’re doing a renovation or are building a new house this faucet is a great option.
- Perfect for all modern kitchens to give that new stainless steel look and will match with the existing stainless steel appliances like your fridge, dishwasher or microwave.
- Best quality 3 way sink mixer tap with a separate purified water chamber.
- Made completely from food grade commercial 304 solid stainless steel, healthy, lead free.
- Inside same as outside, smooth stainless steel chamber, Healthy.
- Warranty: 2 years.
- Ceramic Cartridge made in Europe by Kerox or Ceramtec Germany, aerators made in Switzerland by Neoperl.
- Can be fitted to any under sink water filter system that uses 1/4″ tubing, (default), or 1/2" flexible water connector (optional), click here to add the 1/2" adaptor.
- Can be fitted to any water filter uses 3/8" BSP thread like Brita and others (optional), click here to add 3/8"x1/4" adaptor.
- Can be fitted to any water filter uses M8 thread like Brita and others (optional), click here to add M8 adaptor.
- Easy to install, It can either be installed by a handy homeowner (DIY), or by a plumber (recommended), it fits in the standard cut out holes of standard kitchen sinks or benchtops. Requires 35-40 mm hole which is generally the size hole that most kitchen sinks or benchtops come with standard.
- Hot/Cold Leaver: The default tall hot/cold leaver needs 80mm from the centre of tap hole (kitchen sink tap hole) to the tip of the handle when the handle is pushed fully to the back (wall or window).
Shorter leavers (handles) are available, let us know the distance between the centre of tap hole and wall behind and we will find a suitable solution.
- Achieving 30% water saving while enjoying the same comfortable water experience.
- Australian Watermarked and WELS rated.
- WELS rating 4/6 stars, 7.5 LPM, licence 1750.
- Maximum inlet water pressure: 6 bar / 600 kpa / 87 psi.
- Includes: set of stainless hot/cold hoses, all mounting hardware, spanner/tube for tightening of lock nut and instruction booklet.
- FREE shipping Australia wide.
|Dimensions||50 × 40 × 7 cm|
- Three way mixer tap with filtered water line.
- 360 swivel, fits in the standard cut out holes of standard kitchen sinks
- Short neck, more suitable for small and single sinks, less splash
- 3 in 1 mixer tap with a separate filtered water line
- 360 swivel, fits in the standard cut out holes of standard kitchen sinks.