B085 LE 4040 Low Pressure Membrane
Lewabrane RO B085 LE 4040
4”x40” Low Pressure Membrane
2,000 gpd / 99.5% / 150 PSI
Recommended where low energy consumption is an important consideration
Out of stock
Lewabrane RO B085 LE 4040, 4”x40” Low Energy (Low Pressure) Brackish Water Membrane
New Name: Suez AG-85 P LE , Click Here
The Lewabrane RO B085 LE 4040 Low Energy (LE type) reverse osmosis membranes are recommended for low salinity applications or in applications where low energy consumption is an important consideration.
The Lewabrane RO B085 LE 4040 elements are designed with a highly efficient polyamide membrane barrier layer, providing high flow productivity combined with excellent salt rejection.
Since LE elements in general tend to have a higher fouling tendency from their higher productivity, the Lewabrane RO B400 LE elements are offered with a 0.86 mm (34 mil) feed spacer to reduce the fouling and to improve the cleanability.
The LE membrane products are based on a 150 PSI (10.3 bar) test pressure.
Salt Rejection: 99.5%.
Permeate Flow: 2,000 gpd (7.4 m³/day).
Membrane Area: 85 ft².
Diameter/Length: 4 / 40 inch.
Feed Spacer Thickness: 34 mil.
*Test conditions: TDS 2,000 mg/l NaCl, 10.3 bar (150 psi), 25 °C (77 °F), pH 7, recovery rate 15%.
*Pre-treatment must be used to protect the membrane (like softener, antiscalant dosing pump, sand filter, carbon filter, 5 mic cartridge fitler ...etc)..
Compatible with reverse osmosis membrane types:*
Filmtec BW LE-4040 / GE Desal 4040 / Hydranautics ESPA2-LD-4040 / Toray / CSM
RE4040-BLN / Axeon HF1-4040.
*Check the data sheet for each membrane.
Free shipping Australia Wide, Sydney, Melbourne, Adelaide, Perth, Brisbane ...
Check with us if outside Australia.
Best reverse osmosis membranes price.
|Dimensions||112 × 19.5 × 16 cm|
You may also like…
B085 HF 4040Lewabrane RO B085 HF 4040 4”x40” High Flow Membrane 2,400 gpd / 99.5% / 85 ft² Provides the highest productivity and high salt rejection
Lewabrane RO B085 ULP 4040Lewabrane RO B085 ULP 4040 4 inch x 40 inch Ultra Low Pressure ULP Membrane 2,150 gpd / 99.5% / 110 PSI Designed for Low Salinity Inlet Water to Operate at Ultra Low Pressure (7.8 bar / 110 PSI)
4″x40″ 4040 Membrane Pressure Vessel300 PSI Membrane Housing For 4"x40" 4040 Membranes
5 Micron Filter Replacement, S20A-5A-Box$319.00Box of 30 pcs. 20”x2.5”x5 Micron String Wound Polypropylene Sediment Water Filter Cartridge