Description
High Flow Inline Water Rotameter, Pipe Mountable Variable Area Flow Meter
- Inline Mountable Variable Area Flow Meter or Tube Mount Type Rotameter which has been designed to offer an economical solution for liquid flow measurements.
- Flow Range: (cubic meter per hour)
- 0.6 to 6 CUM/H.
- 1 to 10 CUM/H.
- 1.6 to 16 CUM/H.
- Pipe Connection size: 2″ BSP Threaded Female.
- Simple installation.
- Type: Tube Mountable, Pipe Mounted.
- Body (Tube): Quality Poysulfon (PSU – PS) .
- Float: Plastic ABS (read the max diameter of float).
- Fittings: Plastic ABS.
- O-ring: Silicon rubber.
- Lead: Stainless Steel.
- Max Working Pressure: 600 KPA / 6 Bar / 87 PSI.
- Max Working Temperature: 60 C.
- Light weight, low cost and excellent readability rotameter.
- Used for industrial and domestic application, Widely used in water treatment & filtration industry, reverse osmosis units, irrigation, water pump stations …etc.
- Indoor use for water and non corrosive liquids.
- More sizes and types are available.
- FREE delivery Australia wide.
- Measurement Principle: Variable area flow using a float in a tapered tube made from special plastic materials.
- Operation: The fluid flows up through the tapered tube forcing the float to a position with sufficient free area to enable the flow to pass. This free area is related to the flow rate, the weight of the float and the density and viscosity of the fluid. The pressure drop across the flow meter remains constant over the entire flow range. This occurs because the pressure drop is related to the fluid velocity and area of flow, the area of flow increases as the flow rate increases.
Reviews
There are no reviews yet.