Suez AG-85 P FR 4040 Membrane, Low Fouling Reverse Osmosis Membrane
Suez AG-85 P FR 4040 Brackish Water membrane provides significant reduction in fouling rates increasing the membrane’s efficiency by restoring nominal performance after cleaning. Suez AG Low Fouling RO membranes provide the highest productivity and high salt rejection.
Suez AG-85 P FR 4040 Fouling resistant (FR-type) elements are designed for water with a higher organic or biological fouling rate. The low fouling composite RO B085 FR 4040 provides a low-charged surface that reduces fouling when treating surface water with high fouling potential.
In addition to the low-charged membrane, which provides a lower fouling rate, the Low Fouling Suez AG RO membranes have with a 0.86 mm (34 mil) feed spacer a thicker feed channel, allowing improved movement of solutes and particles through the feed channel and enhancing the cleanability of the element. The thicker feed channel also results in a lower pressure drop through the RO membrane element.
Suez AG-85 P FR 4040 Membrane provides high permeate flows and salt rejection at high salinity inlet water (up to 8,000 ppm NaCl Salinity).
Salt Rejection: 99.5%.
Permeate Flow: 2,400 gpd (8.9 m³/day).
Membrane Area: 85 ft².
Diameter/Length: 4 / 40 inch.
Feed Spacer Thickness: 34 mil.
*Test conditions: TDS 2,000 mg/l NaCl, 15.5 bar (225 psi), 25 °C (77 °F), pH 7, recovery rate 15%.
*Pre-treatment Must be used to protect the membrane (softener, antiscalant dosing pump, sand filter, carbon filter, 5 mic cartridge fitler …etc).
Manufacturer: Suez Germany (previously Lanxess).
4 inch Low Fouling Membrane, Compatible with reverse osmosis membrane Types*:
Filmtec BW30-4040 / GE Desal AG4040FF / Nitto Hydranautics LFC3-LD-4040, LF 4040, CPA2-4040, CPA5-LD-4040 / Toray TM710 / CSM RE4040-BE / Axeon HR3-4040.
*Check the data sheet for each membrane.
Free shipping Australia Wide.
Check with us if outside Australia.