Watermaker RO Membrane Filter Vontron SW11-2540
Vontron SW11-2540, 2.5″ x 40″ Watermaker Membrane Filter. Replaces Filmtec SW30-2540 Seawater Membrane
Watermaker Membrane Replacement Filter Vontron SW11-2540
Vontron SW11-2540 is a standard size seawater membrane, widely used for watermakers, desalinators, seawater desalination systems, marine (yacht and boat), Navy and maritime applications. Commonly used in on-board Watermakers to create drinking water from seawater for yachts, boats, and cruise ships.
Watermaker Membrane DIY, Watermaker Parts.
Vontron SW11-2540 reverse osmosis replacement membrane may also be operated at lower pressure to reduce pump size, cost and operating expenses.
Membrane Product Specifications:
Stabilized Salt Rejection: 99.5%*
Minimum Salt Rejection: 99.3%
Max Permeate Flow: 600 gpd (2.3 m³/day)*
Membrane Area: 28 ft².
Diameter / Length: 2.5 inch / 21 inch.
*Test conditions: 32000 mg/l NaCl, 55.2 bar (800 psi), 25 °C (77 °F), pH 8, recovery rate 8%.
Compatible with reverse osmosis membrane types:*
Filmtec SW30-2540 / Hydranautics SWC-2540 / CSM RE2540-SHF
*Check the data sheet for each membrane.
Max. working pressure: 1200 psi (8.28MPa)
Max. Feed water flow: 6 gpm (1.4 m3/h)
Max. Temperature of Feed water: 45℃
Max. Feed water SDI (15 mins): 5.
pH Range of Feed water during Continuous Operation: 2～11
pH Range of Feed Water during Chemical Cleaning: 1～13
Residual chlorine Concentration of feed water ＜0.1ppm Max.
Pressure drop of single membrane element: 10psi (0.07MPa)
Manufactured by: Vontron, China.
Free Shipping Australia wide, Fast Delivery to New Zealand.
|Dimensions||108 × 12 × 12 cm|