LG RO Membrane BW 4040 ES
LG Reverse Osmosis Membrane, BW 4040 ES Element,
- 4”x40” Low Pressure Brackish Water Membrane.
- 2500 gpd / 99.5% / 150 PSI.
- high permeability at low feed pressure.
- Suitable for low to medium salinity brackish water.
- FREE Delivery (regional areas excluded)*
LG BW 4040 ES Energy Saving Brackish Water RO membranes offer high permeability at low feed pressure significantly reducing operating costs; suitable for low to medium salinity brackish water applications.
It operates at Low Pressure (10.3 bar / 150 PSI) inlet feed water pressure.
LG BW 4040 ES Enery Saving BWRO membranes offer a combination of high rejection, high flow, low pressure feed water, reliability and durability,
LG Chem’s NanoH2O™ brackish water RO membranes serve various municipal and industrial applications and major utilities around the world. LG BWRO membranes, all incorporated with innovative Thin Film Nanocomposite (TFN) technology, are offered in industry standard configurations and can easily fit into existing and new RO plants.
All LG BWRO membranes provide superior performance along with intrinsic anti-fouling property and are suitable for applications where consistent and reliable performance is a must.
Product Specifications:
Stabilized Salt Rejection: 99.5%*
Minimum Salt Rejection: 99.2%
Permeate Flow: 2500 gpd (9.5 m³/day)*
Membrane Area: 85 ft².
Diameter / Length: 4 inch / 40 inch.
*Test conditions: 2000 mg/l NaCl, 10.3 bar (150 psi), 25 °C (77 °F), pH 7, recovery rate 15%.
*Pre-treatment must be used to protect the membrane (softener, antiscalant dosing pump, sand filter, carbon filter, 5 mic cartridge fitler ...etc).
Compatible with reverse osmosis membrane types:*
LG BW 4040 ES Membrane Element can be used as a replacement for the below membrane elements in your existing water treatment equipment.
FilmTec LC LE-4040 / Filmtec BW LE-4040 / GE Desal 4040 / Hydranautics ESPA2-LD-4040 / Toray TMG10D / CSM RE4040-BLN / Axeon HF1-4040.
*Check the data sheet for each membrane.
Operation Conditions:
Max. working pressure: 600 psi (4.14MPa)
Max. Feed water flow: 16 gpm (3.6 m3/h)
Max. Temperature of Feed water: 45℃
Max. Feed water SDI (15 mins): 5.
Max. Feed Water Total Hardness: 10 ppm (softener or antiscalant should be used).
pH Range of Feed water during Continuous Operation: 2~11
pH Range of Feed Water during Chemical Cleaning: 2~12
Residual chlorine Concentration of feed water <0.1ppm Max.
Pressure drop of single membrane element: 15psi (0.1MPa)
Commercial Application:
- Drinking water.
- Softened water for homes, hotels, commercial laundries and car wash.
- Spot free rinse for window cleaning and solar panel cleaning
- Pure water for pharmaceuticals, laboratories, Hemodialysis and electronics
- Sterilisers and autoclaves.
- Chemical industry.
- Aquarium water treatment.
- Boiler and cooling towers make-up water.
- Pure water, boiler water replenishment, foodstuff processing, and pharmaceutical production.
Manufactured by: LG Chem, Korea. (assembled in china).
Download:
Technical Data Sheet
-
Estimated Delivery:Jul 23 - Jul 27
-
Next Day Dispatch

LG RO Membrane BW 4040 ES
LG Reverse Osmosis Membrane, BW 4040 ES Element,
- 4”x40” Low Pressure Brackish Water Membrane.
- 2500 gpd / 99.5% / 150 PSI.
- high permeability at low feed pressure.
- Suitable for low to medium salinity brackish water.
- FREE Delivery (regional areas excluded)*
LG BW 4040 ES Energy Saving Brackish Water RO membranes offer high permeability at low feed pressure significantly reducing operating costs; suitable for low to medium salinity brackish water applications.
It operates at Low Pressure (10.3 bar / 150 PSI) inlet feed water pressure.
LG BW 4040 ES Enery Saving BWRO membranes offer a combination of high rejection, high flow, low pressure feed water, reliability and durability,
LG Chem’s NanoH2O™ brackish water RO membranes serve various municipal and industrial applications and major utilities around the world. LG BWRO membranes, all incorporated with innovative Thin Film Nanocomposite (TFN) technology, are offered in industry standard configurations and can easily fit into existing and new RO plants.
All LG BWRO membranes provide superior performance along with intrinsic anti-fouling property and are suitable for applications where consistent and reliable performance is a must.
Product Specifications:
Stabilized Salt Rejection: 99.5%*
Minimum Salt Rejection: 99.2%
Permeate Flow: 2500 gpd (9.5 m³/day)*
Membrane Area: 85 ft².
Diameter / Length: 4 inch / 40 inch.
*Test conditions: 2000 mg/l NaCl, 10.3 bar (150 psi), 25 °C (77 °F), pH 7, recovery rate 15%.
*Pre-treatment must be used to protect the membrane (softener, antiscalant dosing pump, sand filter, carbon filter, 5 mic cartridge fitler ...etc).
Compatible with reverse osmosis membrane types:*
LG BW 4040 ES Membrane Element can be used as a replacement for the below membrane elements in your existing water treatment equipment.
FilmTec LC LE-4040 / Filmtec BW LE-4040 / GE Desal 4040 / Hydranautics ESPA2-LD-4040 / Toray TMG10D / CSM RE4040-BLN / Axeon HF1-4040.
*Check the data sheet for each membrane.
Operation Conditions:
Max. working pressure: 600 psi (4.14MPa)
Max. Feed water flow: 16 gpm (3.6 m3/h)
Max. Temperature of Feed water: 45℃
Max. Feed water SDI (15 mins): 5.
Max. Feed Water Total Hardness: 10 ppm (softener or antiscalant should be used).
pH Range of Feed water during Continuous Operation: 2~11
pH Range of Feed Water during Chemical Cleaning: 2~12
Residual chlorine Concentration of feed water <0.1ppm Max.
Pressure drop of single membrane element: 15psi (0.1MPa)
Commercial Application:
- Drinking water.
- Softened water for homes, hotels, commercial laundries and car wash.
- Spot free rinse for window cleaning and solar panel cleaning
- Pure water for pharmaceuticals, laboratories, Hemodialysis and electronics
- Sterilisers and autoclaves.
- Chemical industry.
- Aquarium water treatment.
- Boiler and cooling towers make-up water.
- Pure water, boiler water replenishment, foodstuff processing, and pharmaceutical production.
Manufactured by: LG Chem, Korea. (assembled in china).
Download:
Technical Data Sheet
Discover more in our FAQ
What types of industrial water treatment products do you offer?
We offer a comprehensive range of industrial water treatment solutions, including:
Filtration Systems – Effectively removes sediment, chlorine, and other impurities to enhance water purity and system longevity.
Reverse Osmosis Membranes – High-performance purification technology that eliminates dissolved solids, contaminants, and impurities for ultra-pure water.
Membrane Housings – Durable, high-pressure enclosures engineered to protect and optimize the performance of RO membranes.
Filter Cartridges – Precision-engineered sediment, carbon, and specialty filters designed to target specific contaminants for enhanced water treatment efficiency.
Chemical Dosing Systems – Precise chemical treatment for water.
Media FRP Pressure Vessels – High-pressure tanks for filtration media.
Ion Exchange Resins – Softening and demineralization solutions.
Water Instruments – pH meters, conductivity meters, and TDS testers.
Rotameter Flow Meters – Accurate flow measurement devices.
Watermaker Parts – Spare parts for marine and industrial watermakers.
Water Quality Test Kits – Portable and lab testing solutions.
How do I know which product is right for my application?
Choosing the right product depends on:
Water quality parameters (TDS, pH, hardness, contaminants)
Flow rate and pressure requirements
Industry-specific needs (food processing, pharmaceuticals, HVAC, etc.)
If you’re unsure, our technical support team can help you select the best solution.
Do you offer bulk pricing for large industrial orders?
Yes! We provide bulk discounts and custom pricing for high-volume orders. Contact us for a personalized quote.
How long does shipping take?
Shipping times depend on location and stock availability. Standard delivery is 3–7 business days for most regions. Expedited shipping options are available upon request.
What is your return policy?
We offer a 14-day return policy from the date of delivery. If you are not completely satisfied with your purchase, you can return the item for a refund or exchange, provided it meets our return conditions.
What happens if I receive a damaged or incorrect item?
If your item arrives damaged or you receive the wrong product, please contact us immediately at support@waterfilter.net.au with photos and your order number. We will send a replacement or issue a refund as per our return policy..
How long does shipping take?
Shipping times depend on location and stock availability. Standard delivery is 3–7 business days for most regions.
Expedited shipping options are available upon request.
Do you ship internationally?
Yes, we offer international shipping for most of our industrial water treatment products. Contact us for custom shipping quotes and lead times.